Key Takeaways
- The burn multiple is net burn divided by net new ARR over the same period, and it measures how many dollars a startup burns to add one dollar of recurring revenue
- David Sacks's benchmarks rate a burn multiple under 1x as amazing, 1-1.5x great, 1.5-2x good, 2-3x suspect and over 3x bad
- The number should fall as the company matures: Sacks gives the example of roughly 3x at seed, roughly 2x after the Series A, and a path toward 0 as the company nears profitability
- Net burn is cash out minus cash in from revenue, not total spending, so a burn multiple built on gross burn overstates the problem
- Churn and contraction reduce net new ARR, so a leaky customer base shows up as a worse burn multiple even when bookings look strong
- The burn multiple does not compute for pre-revenue startups, which should be judged on burn level, runway and progress toward first revenue instead
A good burn multiple is under 1.5x, meaning a startup burns less than $1.50 in net cash for each $1 of net new annual recurring revenue (ARR). David Sacks, who popularised the metric, rates under 1x as amazing, 1-1.5x great, 1.5-2x good, 2-3x suspect and over 3x bad. Early-stage companies get more slack; the multiple should fall with each round.
The burn multiple became a standard board and diligence metric because it answers one question in a single number: is this company's growth efficient, or is it bought? Below is the formula, the benchmark table, how it shifts by stage, how it compares with the other efficiency metrics investors use, and the calculation mistakes that make a good company look bad.
What is the burn multiple formula?
Burn multiple equals net burn divided by net new ARR for the same period.
David Sacks of Craft Ventures set out the formula in his 2020 post The Burn Multiple:
Burn Multiple = Net Burn / Net New ARR
Each input needs a precise definition:
An illustrative example, not a real company: a startup burns $1.8M of net cash in a quarter and grows ARR from $3.0M to $4.2M. Net new ARR is $1.2M. The burn multiple is $1.8M divided by $1.2M, or 1.5x.
Sacks uses a similar worked case in his post: $2M burned to add $1M of ARR is a 2x multiple, which he calls reasonable for an early-stage company, while $5M burned for the same $1M is a 5x multiple that signals costs should be cut.
What is a good burn multiple?
Under 1.5x is strong for a venture-backed startup, 1.5-2x is acceptable, and anything above 3x means growth is costing too much.
Sacks's rules of thumb for venture-stage startups, from the same post:
Sacks adds a warning that matters more than the table: when extraordinary investment, 3x burn or more, is needed to deliver growth, it suggests product-market fit is weaker than it looks. In his framing, a low multiple means the market is pulling the product; a high one means the company is pushing it.
These bands are one investor's rules of thumb, not a regulation or an industry survey. Other investors weight the metric differently, and some prefer the related measures covered below. Treat the table as the common vocabulary a board will use, not a pass-fail test.
How does the burn multiple change by stage?
The burn multiple should fall as the company matures, from around 3x at seed toward 0 as the business approaches profitability.
Sacks gives the progression directly: a seed-stage company might run at about 3x because it has just started selling, drop to about 2x after its Series A, and face higher efficiency expectations after the Series B, when the sales team should be operating at scale. Profitability means burn reaches zero, so the multiple trends to zero with it.
Two stage rules follow from that:
What if the startup is pre-revenue?
The ratio does not compute when net new ARR is zero. Sacks says that is fine during the early build period, provided founders keep burn low and get to first revenue quickly. Pre-revenue companies are judged on burn level and runway instead. Our burn rate and runway guide covers those calculations.
Why do investors care about the burn multiple?
Because almost every serious operating problem eventually shows up in it, which makes it a fast first screen for diligence.
Sacks calls it a catch-all metric. He lists the problems it surfaces:
It also connects to the survival question Paul Graham put to founders in Default Alive or Default Dead?: on current expenses and revenue growth, does the company reach profitability before the money runs out? A falling burn multiple is the trend line of a company moving toward default alive. A rising one is the opposite, and investors read it that way.
How does the burn multiple compare with other efficiency metrics?
The burn multiple is the simplest growth-efficiency metric for early and growth-stage SaaS; the Rule of 40, Bessemer's efficiency score and CAC payback suit different stages and questions.
A side-by-side view:
For a seed or Series A raise, the burn multiple and CAC payback carry the most weight. The Rule of 40 and the efficiency score are later-stage lenses; quoting them at $1M ARR invites questions you do not need.
What mistakes distort the burn multiple?
The most common errors are using gross burn, using gross new ARR, mismatched periods, and counting non-recurring revenue as ARR.
Check your calculation for these before it goes in a deck or a board pack:
A data room that shows the ARR bridge (starting ARR, new, expansion, contraction, churn, ending ARR) next to the cash flow statement lets an investor verify the multiple in minutes. That is better than a number they cannot reconcile.
How do you improve your burn multiple before a raise?
Cut spend that does not produce ARR, fix churn, and stop counting revenue that is not recurring, in that order.
Practical moves, roughly from fastest to slowest impact:
Model the effect before you act. GIGABOOST's {{INTERNAL:/ai-financial-modeling|AI financial modeling}} builds 5-year projections and a runway model, so you can see how a hiring plan or a spend cut changes burn and the multiple quarter by quarter. Our financial projections guide covers how investors read those models.
How should you present the burn multiple to investors?
Show it as a quarterly trend with the inputs beside it, and explain any quarter that breaks the pattern.
A clean presentation for a deck appendix or the data room:
If the multiple is weak, say why and show the plan. Investors see weak numbers constantly; what costs founders is a number that does not reconcile, or one they did not know. Store the backup in a {{INTERNAL:/ai-data-room|tracked data room}} so you can see which investors opened the financials and for how long.
This article is general information about startup finance, not financial, legal, tax or investment advice. Benchmarks cited are rules of thumb from the named sources, not guarantees of investor response.
Model your burn before investors do
GIGABOOST builds your projections and runway model, then the AI Agent finds best-fit investors from 340,000+ verified profiles and runs outreach from your own LinkedIn and inbox.Frequently Asked Questions
What is a good burn multiple for a startup?
Under 1.5x is strong for a venture-backed startup. David Sacks's framework rates under 1x amazing, 1-1.5x great, 1.5-2x good, 2-3x suspect and over 3x bad. Seed-stage companies that have just started selling often run higher, and the multiple is expected to fall with each round.
How do you calculate the burn multiple?
Divide net burn by net new ARR for the same period. Net burn is cash out minus operating cash in. Net new ARR is ending ARR minus starting ARR, which already subtracts churn and contraction. For example, $1.8M of net burn against $1.2M of net new ARR in a quarter is a 1.5x burn multiple.
Is a lower burn multiple always better?
Lower means more efficient growth, but a multiple near zero can also mean a company is under-investing in growth it could profitably buy. Investors read the multiple alongside growth rate, retention and runway. A steady decline over several quarters is usually the strongest signal.
What is the difference between burn multiple and the Rule of 40?
The burn multiple measures cash burned per dollar of net new ARR and works from early revenue onward. The Rule of 40 says revenue growth plus profit margin should total at least 40% and, as Brad Feld described it, is meant for SaaS companies at scale. Early-stage founders should lead with the burn multiple.
Can a pre-revenue startup have a burn multiple?
No. With zero net new ARR the ratio cannot be calculated. Pre-revenue startups are judged on monthly burn, runway in months and progress toward first revenue. Once ARR starts, track the burn multiple quarterly from the first full quarter of sales.
